EasyManua.ls Logo

Compaq Deskpro 4000N - Page 110

Compaq Deskpro 4000N
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Guide
C-1
Writer: Holly Jahangiri Saved by: ACastle Saved date: 07/24/97 4:38 PM
Pages: 6 Words: 967 Template: d:\95office\templates\commapp.dot
File Name Appc.doc Part Number 308336-001
appendix
C
E
RROR
M
ESSAGES
This appendix lists the error codes that you may encounter
during the Power-On Self-Test (POST) or after restarting the
computer, the probable source of the problem, and what steps
you can take to resolve the error condition.
Power-On Self-Test Messages
Message Beeps* Probable Cause Recommended Action
101-ROM Error 1L, 1S System ROM checksum. 1. Flash the ROM.
2. Replace the system board.
101-Option ROM
Checksum Error
1L, 1S Option ROM checksum. 1. Replace the system board.
162-System Options
Not Set
2S Configuration incorrect. Run Computer Setup or Windows NT or
Windows 95 utilities.
163-Time & Date
Not Set
2S Invalid time or date in
configuration memory
Set the date and time under Control
Panel.
164-Memory Size
Error
2S Memory configuration
incorrect.
Run Computer Setup or Windows NT or
Windows 95 utilities.
201-Memory Error None RAM failure. 1. Run Computer Setup or Windows
NT or Windows 95 utilities.
2. Replace the memory module(s) (if
any).
3. Replace system board.
* L = Long, S = Short
continued

Other manuals for Compaq Deskpro 4000N

Related product manuals