Reference Guide
4-11
Writer: Dianne Fielden Saved By: Holly Jahangiri Saved Date: 07/24/97 4:42 PM
Pages: 14 Words: 1776 Template: c:\template\commercial\comm.dot
File Name Ch4.doc Part Number 308336-001
4. Press out on both latches of the DIMM socket at the same
time
1
. This releases the module and partially pushes it
out of the socket.
5. Lift the module from the socket.
6. To install a memory module, reverse the procedure. Push
the module down
2
into the socket, ensuring that it is fully
inserted and properly seated
3
.
Inserting a Memory Module
✎
When the computer starts up, it will recognize the system
memory upgrade and automatically reconfigure the system.
To Next Page
Loading...
