Reference Guide
4-13
Writer: Dianne Fielden Saved By: Holly Jahangiri Saved Date: 07/24/97 4:42 PM
Pages: 14 Words: 1776 Template: c:\template\commercial\comm.dot
File Name Ch4.doc Part Number 308336-001
4. Pull the locking lever on the left side of the drive to the
left. Slide the drive to the rear of the bay, then lift the drive
from the bay.
Removing the Hard Drive
✎
When replacing the hard drive, transfer the four screws
from the old drive to the new one. There are two
shoulder-head screws on the left side of the drive and two
hi-top screws on the right side. The screws take the place
of drive rails.
To Next Page
Loading...
