Reference Guide
6-1
Writer: Dianne Fielden Saved By: Holly Jahangiri Saved Date: 07/24/97 4:41 PM
Pages: 22 Words: 3184 Template: c:\template\commercial\comm.dot
File Name Ch6.doc Part Number 308336-001
chapter
6
T
ROUBLESHOOTING
This chapter provides information on how to identify and
correct some common disk, display, memory, network, and
software problems. It also identifies and explains some common
messages you may receive on the screen.
Consult Appendix C, “Error Messages,” for an explanation of
specific messages that may display during the power-on self-
test (POST) at startup.
Clean Boot suppresses most system messages during POST,
such as memory count and non-error text messages. If a POST
error occurs, the screen will display the error message. To
manually switch to Descriptive mode during POST, press any
key (except F10).
Descriptive Boot shows all system messages during POST. To
see the system messages every time you restart your computer,
reconfigure your computer to the Descriptive Boot mode, using
Computer Setup.
To Next Page
Loading...
