6-10
Troubleshooting
Writer: Dianne Fielden Saved by: Holly Jahangiri Saved date: 07/24/97 4:41 PM
Pages: 22 Words: 3184 Template: c:\template\commercial\comm.dot
File Name Ch6.doc Part Number 308336-001
Solving Network Problems
continued
Problem Cause Solution
Network status link light
does not turn on or
flashes.
No active network is detected. Check cabling and network
equipment for proper connection.
Network controller is not set up
properly.
Use the Network control application
to verify that device is working
properly.
For more information, refer to
Chapter 3, “Network
Communications.”
System is configured for AUI
connection.
No solution; link LED does not apply
to AUI connections.
Network driver is not properly
loaded.
Reinstall network drivers.
For more information, refer to
Chapter 3, “Network
Communications.”
System cannot autosense the
network.
Disable autosensing capabilities and
force the system into the correct
operating mode.
For more information, refer to
Chapter 3, “Network
Communications.”
continued
To Next Page
Loading...
