Step 5: Connect the Power Cords
Connect the power cords and monitor cord as shown. Turn on the monitor, then turn on the computer.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from either the electrical
outlet or the computer.
CAUTION: Be sure there is a 10.2 cm (4-inch) clearance on all vented sides of the computer
and monitor to permit the required airflow.
ENWW Step 5: Connect the Power Cords 5
To Next Page
Loading...
