If it becomes necessary to call for technical assistance, be prepared to do the following to ensure that
your service call is handled properly:
●
Be in front of your computer when you call.
●
Write down the computer serial number and product ID number, and the monitor serial number
before calling.
●
Spend time troubleshooting the problem with the service technician.
●
Remove any hardware that was recently added to your system.
●
Remove any software that was recently installed.
●
Run the Restore Plus! CD.
CAUTION: Running the Restore Plus! CD will erase all data on the hard drive.
NOTE: For sales information and warranty upgrades (Care Packs), call an authorized service
provider or dealer.
ENWW Basic Troubleshooting 13
To Previous Page
Loading...
Need help?
General