P
RESARIO
N
OTEBOOK
B
EYOND
S
ET
-
UP
G
UIDE
U
SING THE
CD
OR
DVD D
RIVE
5-13
1200 S
ERIES
CD-RW Basics
(available on selected models)
If your Notebook has a
CD-RW drive, you can
create your own audio and
data CDs.
This section covers:
• Installing Adaptec Easy
CD Creator
• Using Adaptec Easy
CD Creator
• Preventing Buffer
Under-run Errors
• Accessing Easy
CD Creator
User Information
CD-RW refers to Compact
Discs (or Drives) that are
Readable and Writable.
You must close all other
Windows programmes before
installing Adaptec Easy CD
Creator .
Installing Adaptec Easy CD Creator
Insert the Adaptec Easy CD Creator disc into the CD-RW
drive and complete the following steps to install the Adaptec
Easy CD Creator software.
Easy CD Creator and Direct CD
To install the Easy CD Creator, complete the following steps:
1. Once the CD is inserted, the Adaptec Installation dialogue
box opens. Click Easy CD Creator.
2. Follow the on-screen installation instructions.
3. When prompted, select a location on the hard disk to store
the Easy CD Creator programme, or accept the
recommended location, and then click Next.
4. When prompted, select a folder where the programme
icons will be placed or accept the recommended location
and click Next.
5. When the installation is complete, click Finish.
6. You will be prompted to restart your Notebook. You must
do this before you can use Adaptec Easy CD Creator.
To install the Direct CD programme, complete the following
steps:
1. On the Adaptec Installation Window, click Direct CD.
2. Follow the on-screen installation instructions.
3. When prompted, select a location on the hard disk to store
the Direct CD programme, or accept the recommended
location, and then click Next.
4. When prompted, select a folder where the programme
icons will be placed. Click Next to continue the
installation.
5. When the installation is complete, click Finish.
To Next Page
Loading...
