Compaq Presario 5700 Series - Memory Test Error Codes

114-xx Speaker test failed 1. Verify the speaker connection.
2. Replace the system board and retest.
199-xx Installed devices test failed 1. Check system configuration.
2. Verify cable connections.
3. Check switch settings.
4. Run Compaq Utilities.
5. Replace the system board and retest.
Top
Memory Test Error Codes
Error
Code
Description Recommended Action
200-xx Invalid memory
configuration
1. Verify memory module value compatibility.
2. Reinsert memory in the correct location.
201-xx Memory machine ID test
failed
The following steps apply to error codes 201-xx and
202-xx:
202-xx Memory system ROM
checksum failed
1. Flash the ROM and retest.
2. Replace the memory and retest.
3. Replace the system board and retest.
203-xx Memory write/read test
failed
The following steps apply to error codes 203-xx
through 210-xx:
204-xx Memory address test failed 1. Remove one memory module at a time until the
error message stops.
206-xx Increment pattern test
failed
2. Replace other removed modules one at a time,
testing each to ensure the error does not return.
210-xx Random pattern test failed 3. Replace the system board and retest.
Top
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/diag_ec.html (3 of 6) [1/10/2002 11:55:34 AM]