Compaq Presario 5UV430 - Page 114

United States
Compaq Presario Internet PC 5000 Series Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT PROCEDURES
JUMPER AND SWITCH INFORMATION SPECIFICATIONS
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
Replacing the Microprocessor/Heatsink Assembly, Continued
Replacement
Align corner
(see graphic) of the
microprocessor with Pin 1 on the
microprocessor interface socket on the
system board.
7.
Place the microprocessor into the
microprocessor interface socket on the
system board. Close the lever
to lock the
microprocessor in place.
8.
Next Step