United States
Compaq Presario Internet PC 5000 Series Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT PROCEDURES
JUMPER AND SWITCH INFORMATION SPECIFICATIONS
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
Removing the Memory Module
Removal
Perform the preparation procedures.1.
Pull outward on the release latches found
on both ends of the memory module.
2.
Lift the memory module from the system
board slot.
3.
Replacement
Ensure that the latches
on both ends of
the memory modules are pushed to the
outside.
1.
Align the memory module with the memory
slot.
2.
Push the module carefully and firmly into the
slot, ensuring that the latches on both ends
snap into place.
3.
To Next Page
Loading...
