United States
Compaq Presario Internet PC 5000 Series Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT PROCEDURES
JUMPER AND SWITCH INFORMATION SPECIFICATIONS
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
Replacing the Microprocessor/Heatsink Assembly, Continued
Replacement
Hook the microprocessor clip on the side of
the heatsink assembly to the center tab on
the microprocessor interface socket on the
system board.
10.
Next Step
IMPORTANT
Do not let the screwdriver slip and hit the system board when hooking up the
microprocessor clip. The system can be damaged if its surface is struck.
To Next Page
Loading...
