1–2 Getting Started
Hardware Setup
Step 1: Identify the Setup Hardware
To set up the notebook for the first time, you need the notebook,
the AC adapter 1, the power cord 2, and the battery pack
3.
If you would like to use the modem to register your notebook and
operating system during software setup, you will also need the
modem cable 4.
If you are connecting the modem cable in a country where
RJ-11
telephone jacks are not standard, you will need the
modem
adapter 5 to connect the modem cable. (If you purchased
the notebook in a country where RJ-11 jacks are not standard, a
modem adapter specific to the country in which you purchased
the notebook is included with the notebook.)
(Power cords, modem cables, and modem adapters vary by region
and country. Battery packs vary by model.)
To Next Page
Loading...
