Compaq Presario V3500 - Display Assembly

Display assembly
Description Spare part number
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (includes microphones)
448611-001
14.1-inch, WXGA, BrightView display assembly for use only in defeatured computer models with AMD
processors without a camera module
451163-001
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (includes microphones)
457348-001
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (does not include microphones)
457349-001
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors with a camera module (includes microphones)
462761-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 53).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 57).
6.
Remove the following components:
a.
Keyboard (see
Keyboard on page 66)
b.
Switch cover (see
Switch cover on page 69)
Remove the display assembly:
1.
Close the computer and turn it upside down, with the front toward you.
Component replacement procedures 71