Compaq V70 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . .
2-8 Operating the Monitor
Part Number 255636-001 - - Writer: Troy Witte - Saved by Troy Witte
Saved date: 09/23/97 2:15 PM - File Name T:\docs\codename\partnumber\CH2.DOC
Energy Saver Feature
This monitor has an energy saver feature that allows the computer to
control the power consumption of the monitor. The energy saver
feature combines hardware and software components and puts the
monitor into a reduced power state when it is not in use.
There are three different modes of operation:
■ Full power
■ Suspend
■ Sleep
Full power mode is the normal mode of operation. The monitor goes
into the suspend mode after a user-selectable period of keyboard and
mouse inactivity. Sleep mode, which results in a power savings of
over 90 percent, activates after a second period of keyboard and
mouse inactivity. The length of the inactivity period required before
the monitor goes into suspend or sleep mode is determined by you
and by settings in the Energy Saver utility.
The following table describes the monitor energy saver levels during
the different modes of operation.
Energy Saver Levels
Mode Power Usage Description
Full Power Less than
115 watts
ON = Normal operation
Power LED is green.
Suspend Less than
15 watts
Monitor screen is blanked. High
voltage is off. Heater voltage is on.
Power LED turns amber. Full
power mode returns quickly.
Sleep Less than
8 watts
Monitor screen is blanked. High
voltage is off. Heater voltage is off.
Power LED turns amber. There is
a brief warm up period before
returning to full power mode.
NOTE: The energy saver features for monitors only work when
connected to computers that have energy saver features.

Compaq V70 Specifications

General

Brand	Compaq
Model	V70
Category	Monitor
Language	English