. . . . . . . . . . . . . . . . . . . . . . . . .
B-2 Power Cord Set Requirements
Part Number 255636-001 - - Writer: Marianne Silvetti - Saved by Marianne Silvetti - Saved date: 03/15/96 1:21 PM
File Name T:\docs\codename\partnumber\APPB.DOC
Country-Specific Requirements
Power Cord Set Requirements - By Country
Country Accredited Agency
Applicable Note
Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
The Netherlands KEMA 1
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
Notes:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-
conductor, 1.0 mm
2
conductor size. Power cord set fittings
(appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country
where it will be used.
2. The flexible cord must be Type SJT or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type
with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A 250V)
configuration.
To Next Page
Loading...
Need help?
General
