Notes：
►
Please only use the power adapter are recommended by supplied or equivalent products;
►
When disconnecting the AC adapter plug, handheld plug connector housing, to avoid the pulling
on the cable in force;
►
Avoid drag the power adapter cable, otherwise it will damage the cables, causing fire and shock;
► Avoid put power adapter around a heating device, otherwise the cable may melt, causing fire
and shock;
► If you do not use the printer in a long time, disconnect the power supply of printer power
adapter.
4.4 Interface Cable Connection
1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug;
3) Connect the other end of the interface cable to the host.
4.5 Cash Drawer Connection
1) Make sure the printer's power switch is turned off;
2) Connect the cash drawer cable into the cash drawer interface on the rear side of the printer.
Warning: Cash drawer interface can only be connected to a voltage of 24V cash drawer
device (can’t connect to the phone line, etc.)
4.6 Media Loading
Confirm the type of paper used by the printer before printing. The default paper type is specified
thermal paper.
Choose the paper guide according to the printing paper.
To Next Page
Loading...