CompuSTAR RF-1WR3R-AM - User Manual

8102REUCL000100 // FT-1B Guide REV1
QUICK START CARD
RF-1WR3R-AM
Tap this button for 1 second to lock your doors and/or arm your vehicle.
Tap this button twice within 1 second to unlock your doors and/or disarm
your vehicle.
Hold this button for 3 seconds to start your vehicle. Your vehicle’s parking lights
will flash once and/or siren will chirp once for confirmation. Repeat and your
vehicle will shut off.
Valet Mode: If your remote start is not working, you may be in Valet Mode. Your parking
lights will also not flash. Your doors will still lock and unlock. To exit Valet Mode, turn the
vehicle’s ignition On and then tap this button 5 times, waiting a second between each tap.
Your vehicle will flash the parking lights twice and exit Valet Mode. You can also exit Valet
Mode by turning the ignition On and then tapping the foot brake 10 times or reprogramming
your remote(s).
1W1B_QuickCard line.indd 1 2013/6/6 9:28:50

CompuSTAR RF-1WR3R-AM Specifications

General

Brand	CompuSTAR
Model	RF-1WR3R-AM
Category	Remote Starter
Language	English

Summary

Remote Operation Guide

Basic Button Functions

Use the START/STOP button to lock, unlock, and start/stop your vehicle.

Valet Mode Management

Learn how to enter or exit Valet Mode using specific button presses or foot brake sequences.

Alarm LED Codes

Alarm Trigger Events

Correlate LED flashes with specific alarm trigger events such as door, hood, or sensor activation.

Start Error Codes

Parking Light Flash Codes

Understand remote start error codes indicated by parking light flash patterns.

Remote Start Error Explanations

Interpret remote start errors related to motor, ignition, doors, trunk, and sensors.

Remote Programming

Reprogramming Procedure

Guide to reprogramming remotes by cycling ignition and pressing the lock button.