Need help?Do you have a question about the CompuSTAR CM4200DX and is the answer not in the manual?
General| Brand | CompuSTAR |
|---|---|
| Model | CM4200DX |
| Category | Remote Starter |
| Language | English |
Visual representation of module connections and pinouts for installation.
In-depth explanations of each wire connection and its function for the CM4200-DX module.
Configuration settings on the control module for specific functions and inputs.
Jumper wire function determining transmission type (manual/automatic) and warranty implications.
Procedures and requirements for updating the control module's firmware.
Guidance on mounting the antenna and routing its cable for optimal system performance.
Step-by-step instructions for programming remote transmitters to the control module.
Instructions for programming and using the optional Secure Valet switch for system access.
Method for teaching the system to recognize engine RPM for reliable remote starting.
Alternative engine sensing method using the vehicle's alternator output.
Engine sensing mode using vehicle battery voltage, suitable for specific vehicles and conditions.
Overview of system functions and charts for operational error codes.
Method for configuring system options using a 1-Way remote transmitter.
Method for configuring system options using a 2-Way remote transmitter.
Procedure for setting options via the antenna button for 1-Way remotes.
Using the OP-500 programmer for special option groups and advanced configuration.
Detailed explanations of each programmable option for the CM4 series modules.
Details the terms and conditions of the product's warranty coverage.
To Next Page
