Comunello Automation CU-230V-2M

Need help?

Do you have a question about the Comunello Automation CU-230V-2M and is the answer not in the manual?

Summary

Menu List Overview

Main Menu Functions

Lists primary functions and their LED indicators for basic operation.

Extended Menu 1 Functions

Lists advanced functions and their LED indicators for expanded control.

Extended Menu 2 Functions

Lists specialized functions and their LED indicators for fine-tuning operation.

Motor Connection Diagrams

Abacus Motor Wiring

Details wiring configuration for Abacus motors to the control unit.

Ram Motor Wiring

Details wiring configuration for Ram motors to the control unit.

Condor Motor Wiring (Part 1)

Details wiring configuration for Condor motors, including master/slave setup.

Condor Motor Wiring (Part 2)

Details wiring configuration for Condor motors, including master/slave setup.

Eagle Motor Wiring

Details wiring configuration for Eagle motors to the control unit.

Condor 500 Motor Wiring

Details wiring configuration for Condor 500 motors to the control unit.

Manufacturers Declaration

EC Declaration of Conformity

States compliance with EC directives and harmonized standards for the control unit.

Installation and Technical Details

Prescriptions and Safety

Details safety, wiring, and installation requirements for 230V power supply.

Technical Specifications

Lists power, outputs, temperature, and radio receiver details.

Installation and Connections

Covers pre-checks, installation steps, terminal connections, and transformer wiring.

Operation Modes

Describes step-by-step, automatic closing, photocell, force, deceleration, timer, and lock functions.

Programming Functions

Main Menu Programming

Details programming for Delay, Step-by-Step, and Remote Control codes.

Delay and Step-by-Step Logic

Explains setup for operator delay and step-by-step operating modes.

Remote Control Coding

Covers saving, deleting, and programming remote control transmission codes.

Advanced Programming Features

Remote Control Programming Rules

Explains the rule for the first saved remote control type (fixed or rolling code).

Condominium Function Setup

Details how to enable or disable the Condominium function for simultaneous control.

Motor Time and Deceleration Programming

Explains programming motor time and deceleration for opening/closing cycles.

Pause Time and Pedestrian Time

Details programming for automatic closing (Pause Time) and pedestrian operation time.

Extended Menu Programming

Extended Menu 1 Functions

Details programming for features like Remote Code PGM, Fototest, and Deceleration.

Extended Menu 2 Functions

Details programming for Soft Stop, Soft Start, Hold-to-Run, and other features.

Reset and Diagnostics

Explains how to reset the control unit and interpret diagnostic indicators.