Comunello BORDER 400 - User Manual

20
COMUNELLO ®Copyright 2021 - All rights reserved
BORDER 400 / 600
INSTALLATION AND USER MANUAL
EC DECLARATION OF CONFORMITY
The undersigned, Mr LUCA COMUNELLO, representative of the following manufacturer
F.lli COMUNELLO spa
Via Cassola 64, 36027 Rosà (VI) Italy
DECLARES that with regard to the device hereinafter described:
Description Manually operated barrier 3/4/5/6 metres
Model BORDER W/ MOTOR 400 / 600
complies with the legislative provisions that transpose the following directives:
• 2006/42/EC (Machinery Directive)
• 2011/305/EEC (CPR Regulation)
• 2011/65/EU (RoHS Directive)
Rosà (VI) – Italy
28-10-2021
Moreover, the undersigned also declares that it is prohibited to place the machinery into operation until such time as the machine into
which it will be incorporated, or of which it will become a component, has been identied and declared as conforming to the provisions of
Directive 2006/42/EC and the national legislation transposing said directive.
LUCA COMUNELLO
Legal Representative of FRATELLI COMUNELLO s.p.a.
Fratelli Comunello S.p.A.
Company with certied Quality Management System
UNI EN ISO 9001:2015.

Summary

EC DECLARATION OF CONFORMITY

Manufacturer and Product Compliance

Declaration by the manufacturer regarding product model and compliance with key EU directives.

3 TECHNICAL SPECIFICATIONS

BORDER Model Specifications

Details technical data for BORDER 400 and 600 models, including boom length and mass.

4 INSTALLATION

4.1 PRELIMINARY CHECKS

Verifies accessories, operating limits, and clearances before commencing installation.

4.2 LIMITS OF USE

Specifies limitations for boom length and checks data against product technical specifications.

4.3 INSTALLATION WORKS

Details assembly of counter plates and anchor bolts in concrete or existing footings.

4.4 INSTALLATION OF THE MANUALLY OPERATED BORDER BARRIER SYSTEM

Covers positioning the barrier on the counter plate and securing the pedestal with nuts and washers.

4.4.2 ADJUSTMENT OF MECHANICAL STOPS

Adjusts closure and opening stops using screws and locknuts for precise boom positioning.

5 INSTALLATION OF THE PENDULUM SUPPORT

Boom Pendulum Support Installation

Guides through removing plugs, cutting sleeves, and securing the pendulum support to the boom.

6 INSTALLATION OF THE SKIRT

Boom Skirt Attachment

Details removing caps, marking, drilling, and securing the skirt to the boom.

7 TESTING

Manual Barrier System Testing

Outlines the sequence of operations to test the manually operated BORDER barrier system.

8 PRODUCT MAINTENANCE

Scheduled Maintenance Procedures

Specifies regular maintenance requirements, including checking parts, moving components, and lubrication.

9 SPARE PARTS

Ordering Spare Parts

Information on how to order spare parts by contacting the technical department.

10 DISPOSAL

System Dismantling and Disposal

Procedure for dismantling the system at end-of-life for recycling or disposal per local legislation.

11 WARRANTY

Standard Warranty Terms

Outlines the terms, validity period, and conditions of the Standard Warranty for the product.

Comunello BORDER 400 Specifications

General

Brand	Comunello
Model	BORDER 400
Category	Control Systems
Language	English