EasyManua.ls Logo

Comunello BORDER 400 - 7 TESTING; Manual Barrier System Testing; 8 PRODUCT MAINTENANCE; Scheduled Maintenance Procedures

Comunello BORDER 400
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
ENGLISH
COMUNELLO ®Copyright 2021 - All rights reserved
FIG. 20
7 TESTING
To test the manually operated BORDER, carry out the following sequence of operations:
Check that all the prescriptions in this manual have been followed scrupulously, with special attention to chapter 1 “General
Prescriptions”;
8 PRODUCT MAINTENANCE
Maintenance must be regularly carried out by qualied personnel in accordance with the legal and regulatory provisions in force.
Manually operated BORDER barriers require scheduled maintenance within 6 months of a previous maintenance cycle.
Check all the moving parts and renew any worn parts
Check the condition of all components making up the automation.
Lubricate all moving parts.
9 SPARE PARTS
Spare parts can be ordered when needed by contacting the technical department.
10 DISPOSAL
At the end of its useful life the automation system must be dismantled by qualied personnel and the materials must be recycled or
disposed of in compliance with the local legislation in force.
11 WARRANTY
a) This warranty supplied as part of commercial dealings or the sale of goods for professional use, is limited to the repair or replacement
of Product parts recognised by FRATELLI COMUNELLO SPA as defective with equivalent repaired Products (hereinafter “Standard
Warranty”). The warranty does not cover the costs incurred by the repair and replacement of materials (for example, cost of labour,
material rental, etc.).
b) The application of the discipline dictated by articles 1490-1495 of the Italian Civil Code is excluded.
c) FRATELLI COMUNELLO SPA warrants the proper operation of the products within the limits indicated in 1 above. Unless otherwise
agreed, the Standard Warranty is valid for a period of 24 (twenty-four) months from the date of production, indicated on the Products
themselves. The Warranty is valid and binding for COMUNELLO only if the product is correctly assembled and serviced in accordance
with the rules of installation and safety indicated in the documentation provided by COMUNELLO or in any case available on the
website http://www.comunello.com/it/corporate/condizioni-generali/
d) The warranty does not cover: faults or damage due to transportation; faults or damage caused by defects in the electric supply
system installed at the premises of the purchaser of the Product and/or negligence, inadequacy or improper use of that system; faults
or damage resulting from tampering on the part of unauthorised personnel or as a result of incorrect use/installation (in this regard,
we recommend that the system be serviced at least every six months) or utilisation of non-original spare parts; defects caused by
chemical agents and/or atmospheric conditions.