J-clip
HR Receiver
Procedure
concept2.com
0311
D.
Installation Leader Tape
E.
J-clip
Heart
Rate
Cable
Drive
Cord
3. Atthebackendoftherailassemblynearthe
ywheel,feedthetapedendoftheinstallation
leadertapethroughtheholeintheundersideof
therailassembly.SeeimageC.
Feedtheinstallationleadertapealltheway
throughtherailassemblyuntilitcomesoutthe
frontendandtotheleftofthedrivecord.Partially
unwrapthewhitetapeontheinstallationleader
tapeandwrapitaroundtheendoftheHRcable
sothattheinstallationleadertapeandcableare
connected.SeeimageD.
DONOTlettheHRcablewraparoundormake
contactwiththedrivecord.THISISVERY
IMPORTANT!SeeimageE.
4. Atthebackendoftherailassemblynearthe
ywheel,pulltheinstallationleadertapewith
theconnectedHRcablebackthroughtherail
assembly.DisconnecttheHRcablefromthe
installationleadertape.
5. Removeadhesivebackingfromtheremaining
J-clipandplaceonrearlegwhereshown.Mount
receiverundermonorailwhereindicatedin
imageFusingVelcropatch.ThreadtheHRcable
betweentheseatbungeecordandtheseat
assembly,plugintothereceiverandsecureinto
theJ-clip.
6. TuckexcessHRcablebackintotherailassembly.
C.
F.
Rear Foot Stop