Concept2 Dynamic User Manual

INSTALLING THE POLAR HEART RATE RECEIVER
ON THE DYNAMIC INDOOR ROWER
Materials Needed
• 2HeartRate(HR)Cables(identical)
• 5J-clips
• 1PolarReceiverwithVelcroPatch
• 1InstallationLeaderTape
Procedure Overview

• PlugoneHRcableintoperformancemonitor
• AdhereJ-clipstoDynamicIndoorRower
• ConnectthetwoHRcables
• FeedHRcablethroughrailassembly
• AttachPolarreceivertoundersideofrailassemblyand
 plugintoHRcable
concept2.com
0311
Procedure
1. PlugrstHRcableintothebottomoftheperformance
monitorasshown.SeeimageA.
J-clip
J-clip
J-clip
J-clip
HR Receiver
Heart Rate Cable
Monitor Pickup Cable
J-clips
A.
B.
2. Removeadhesivebackingfromfour(4)J-clipsand
positionasshowninimagesAandB.

 ThreadrstHRcablethroughtheJ-clipsandpluginto
secondHRcabletomakeonelongcable.Ifneeded,
tapetheconnectionpointtoensuretheHRcables
stayconnected.

Concept2 Dynamic Specifications

General

Type	Rowing Machine
Resistance Type	Air
Monitor	PM5
Color	Light Gray
Weight Capacity	500 lb (227 kg)
Wireless Connectivity	Bluetooth and ANT+
Seat Height	36 cm (14 in)
Dimensions	96 in x 24 in x 32 in (244 cm x 61 cm x 81.3 cm)
Storage Position	Can be separated into two parts for storage