CONDTROL XP3 - Product Description; Operation

User manual
LASER DISTANCE METER
6
EN
XP3 CONDTROL
7
User manual
LASER DISTANCE METER
EN
XP3 CONDTROL
PRODUCT DESCRIPTION
1. Display
2. Keyboard
3. Turn on the product/turn
on laser beam/single distance
measurement/continuous
measurement
4. Addition/up/increase the value/
flip through measuring results in
memory (forward)
5. Subtraction/down/decrease
the value/flip through measuring
results in memory (backwards)
6. Menu/choose menu option/
activate setting of menu function/
scroll measuring results down
7. Area/volume/triangle area/
trapezium area
8. Calculations by tilt sensor and
Pythagoras’ Theorem
9. Timer/reference point setting
10. Memory/digital vial
11. Turn off the product/clear/
exit menu/exit mode
12. Strap location
13. End-piece
14. Mini-USB connector for
charging
1
2
3
4
8
10
5
7
9
14
12
1113 6
Display
1. Main line
2. Additional lines
3. Mode indicator
4. Charge level indicator
5. Unit of measurement
6. Laser beam indicator
7. Reference point
2
7
6
4
5
1
3
OPERATION
Install/charge batteries
Insert batteries observing correct polarity. Use nickel metal-hydride batteries.
Charge level is shown on display. Charge batteries when symbol appears on
the display. Use USB charger delivered in the set.
Don’t use the product while charging.
It takes approximately 4 hours to fully charge the batteries.
Turn on/off
Turn on: press .
Turn off: press and hold for 1 second.