Conlan CT1000 - Programming Users; Positions; Programming the User Codes

3. Programming Users
3.1 Positions
CT1000 has 28 positions, which can contain a code from 1 to 8 digits.
The code in position 1 is 1234 (default)
3.2 Programming the User Codes
TheMasterCodeisusedtoprogram/change/deletetheusers.BydeafualttheMasterCodeis
4711.
LED indication: No light: ○ Light: ● Flash: * Clearbuer:
New users
(4711 - standard)
○ ● ○ ● ● ○
● ● ○  ○ ● ○
Toprogrammoreusers,continuefrom“Keyinthepositionortype toexit.
● ○ ○
Changing codes
It’s the same procedure as programming new users, just overwrite the positions.
Delete specic users
(4711 - standard)
○ ● ○ ● ● ○ ○ ● ○ ● ○ ○
Delete all users
(4711 - standard)
○ ● ○
○ ○ ●  ○ ● ○
● ○ ○
4
#
Key in the
Master Code
#
Key in the
position
#
Key in the user
code
#

#
Key in the
Master Code
#
Key in the
position
##
#
Key in the
Master Code
#
Key in
2500
#