Need help?Do you have a question about the Conlan C1000LP and is the answer not in the manual?
Defines 200 user positions activating outputs 1, 2, or both, with reserved positions for special functions.
Utilizes the Master code to program, change, or delete user codes, with default Master code 4711.
Enables programming codes for special functions, activating outputs for a set duration, or toggle modes.
Allows quicker code programming by automatically advancing to the next position after entry.
Configures low battery warnings based on chemistry type and cell count for immediate notification.
Allows users to define custom battery low warning thresholds based on voltage.
The Service code (12347890) unlocks advanced settings for Master code, Service code, and LED indications.
Lists configuration settings, their positions, and factory default values for C1000LP.
Procedure to change the Master code, which controls user programming and management operations.
Instructions for changing the Service code to secure access to configuration settings.
Adjusts the behavior of LED indicators for standby, correct code, and keying feedback.
Configures output types (H-Bridge, open collector) and timing for the two available outputs.
Enables/disables special functions like buzzer, mute reader, bell, Onetime/Day code, and locker modes.
The keypad blocks access for 1 minute after four incorrect code entries.
Step-by-step guide to reset the C1000LP to factory defaults, erasing all user data.
Utilizes ConlanCode Generator for creating one-time use or single-day valid codes.
Configures the time parameters (year, month, day, hour, minute) for code validity.
Enables one-time or day code functionality through specific keypad entries.
To Next Page
General