11
2.1.6 Sawing Attachments
NOTES:
1. See the appropriate
PowerPro
handpiece
instruction manual for information to
insert and drive wires and pins.
2. Do not operate any saw attachment
(Reciprocating Saw - PRO2045, Sagittal
Saw - PRO2043) in the oscillate mode.
They are only to be operated in the drill
mode.
3. Operating speed will vary based on the
power source in use.
2.1.6.1 Sagittal Saw Attachment
(PRO2043)
Specifications:
Operating Speed: 0 - 26,000 cpm
Stroke: 4° arc
NOTE: The sagittal saw attachment accepts
only Hall 5023 Series Sagittal Saw blades.
2.1.6.2 Reciprocating Saw Attachment
(PRO2045)
Specifications:
Operating Speed: 0 - 26,000 cpm
Cutting Stroke: 0.125 inch (3.2mm)
NOTE: The reciprocating saw attachment is
designed to accept Hall 5052-058 thru -061, -
073, -179, -258 thru -261, -273, -276 and -279
series blades. Refer to the Hall Catalog for
blade information.
To Next Page
Loading...
