2
8. Continually check all attachments for over-
heating. If overheating is noticed, discon-
tinue use and return equipment for service.
9. Do not attach, insert or remove accessories
or attachments while the handpiece is oper-
ating.
Place the handpiece safety button
to the safe position prior to installation
or removal of items
.
10. All reaming attachments have a red colored
ring and are not designed to be used in the
screw or oscillate modes.
11. Do not operate any saw attachment
(Reciprocating Saw - PRO2045, Sagittal
Saw - PRO2043) in the oscillate mode.
They are only to be operated in the drill
mode.
12. After each use, thoroughly clean attach-
ments (See
“3.1 Cleaning and Sterilizing”
on page 12
).
1.3 Symbol Definitions
Attention, consult accom-
panying documents.
Single Use Only.
No user service recom-
mended. Refer servicing to
qualified Linvatec service
personnel.
Indicates product compo-
nent should not be steril-
ized.
Indicates product compo-
nent should not be
immersed in any type of
fluid.
Indicates product should
not be oiled or lubricated.
Eye Protection Required.
Caution: Federal Law
restricts this device to sale
by or on the order of a phy-
sician.
Rx ONLY
To Next Page
Loading...
