Send Emergency Alarm
If the current channel has the emergency system enabled and the current
channel is used as the emergency revert channel, pressing the programmed “
emergency on/off” key sends alarm information, the LED indicator glows red, and
the radio displays icon as “regular” type.
Exit emergency mode
If the Emergency Type is Regular and in Emergency Alarm mode, the radio will
continue to send Alarm messages and stay in the alarm mode until it gets back
an ACK or the number of retries sent is at the maximum number programmed.
You can also exit the alarm mode by a long press of the Emergency on/off key. If
Emergency Type is silent or silent with voice, pressing the PTT key or a long
press of the programmed emergency key will exit the emergency mode.
Receive Emergency Information
When the feature” emergency alarm indication” is enabled, if received emergency
information, the radio displays icon , the transmitter’s ID and name, an alarm
tone will sound. To exit the emergency mode, long press the programmed
emergency key.
Analog Channel（ ）
In analog mode, the radio only supports three basic operations. The first is the
scanning, the second is zone and the third is settings. The scan and zone
features are the same as in the digital mode. The radio settings is the same as
digital except squelch level has been added.
33
To Next Page
Loading...