Conrad SL1007 - Setting Time and Date

21
Setting the Time and Date in PIR operation mode:
Your HUNTING CAMERA uses the 24hr military time format.
• Slide the switch to the CAM position, LCD display will
show the camera status screen.
• Press the [M] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press [OK] to confirm the
camera’s operation is PIR detection.
• Press [UP] or [DN] button until the word T is blinking.
• Press [OK] to enter Minute setting first.
• The MINUTE digits will be blinking.
• Press [UP] or [DN] to increase or decrease the minute
value (00 – 59).
• Press [OK] to save your selection and enter Hour setting.
• The HOUR digits will be blinking.
• Press [UP] or [DN] to increase or decrease the hour value
(00 – 23).
• Press [OK] to save your selection and enter Month setting.
• The MONTH digits will be blinking.
• Press [UP] or [DN] to increase or decrease the Month
value (1 - 12).
• Press [OK] to save your selection and enter Day setting.
• The DAY digits will be blinking.
• Press [UP] or [DN] to increase or decrease the Day value
(01 – 31).