14
NFC (Near Field Communication)
Operation
NFC enables you pair and connect with Bluetooth® devices in a
easy way.
1. Make sure that your NFC is turned “On” on your mobile device.
2. Hold your mobile device about 1.5cm close to NFC logo on the
left side of unit for receiving an auto-connection between your
mobile device and radio.
3. Your device then will turn-on Bluetooth® automatically and
will pair your device with radio. No additional settings are
necessary.
AUX IN Operation
1. Use the 3.5 mm audio cable to connect the unit to an audio
device. The unit will enter AUX IN mode automatically.
2. Press VOLUME + / – to adjust the volume.
Maintenance
Ensure the unit is fully unplugged before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free
cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray aerosol at or near the unit.
SCPEGBL_CG_SI15E_IB_5L_170104_will.indb 14 4/1/2017 6:35 PM
To Next Page
Loading...