Medical Test Supply www.medicaltestsupply.com
Chapter16 Installation Of The Software
16.1 Host Requirements
Pentium IV 1.8G or more
Operation System:Windows XP
EMS memory: 256M or more
Hard Disk: 40G or more
Display: 17 inch or more
CD-ROM
USB: 2 or more
Resolution of printer: 600 DPI
16.2 Installation of Software
1.Place the CD-ROM in the CD-ROM compartment located on your computer.
2.If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear
in the screen; otherwise follow install instructions below:
1.Open Windows Explorer.
2.Click on the root CD-ROM directory.
3.Follow the instructions in the screen.
Refer to "Software Help” for details about the operation method of the PC software.
To Next Page
Loading...
