Medical Test Supply www.medicaltestsupply.com
You'd better take off batteries when use the AC adapter as power source. If there is any
damage to the AC adapter, you should use batteries to run the device.
When adapter and batteries are both used at the same time, the battery power will not be
consumed. Switch adapter and battery as power supply when the device is off, otherwise,
the device may shutdown due to power failure.
Chapter6 Setting The Date And Time
It is necessary to set date and time after turning on the device.
The Electronic Sphygmomanometer automatically stores measurement results with date and
time.
If dry battery power exhausts or removed, then, after the device turned on, the date resumes
from the last setting value and the time from 00:00:00, set the date and time again.
The Electronic Sphygmomanometer stores the measure results of three users automatically, and
up to 100 items for every user. The results can be uploaded to PC via USB and processed with
the PC software. If the date and time are set correctly, the date and time when measuring will be
correct in the memory, otherwise it may not be correct.
Note
Correctly use data upload function:
1. Turn on the device to enter the main interface shown as the follow:
2.Press 【MENU】 button to enter 【SYSTEM MENU】 and select【SYSTEM TIME】 item
in system menu. The current time will be displayed:
3.Press 【UP】 or 【DOWN】 buttons to set date and time.
4.After setting, select 【CONFIRM】 item and press 【ENTER】 button to confirm the setting
value. If you do not want to change the time, select 【EXIT】 item and press 【ENTER】 button
to return the previous menu.
To Next Page
Loading...
Need help?
General
