Contec SIS-8601-LVA - Parallel Port Connector: CN6

2 Hardware Installations
SIS-8601-LVA
15
Note: Computer systems that have an unshielded cable attached to a USB port may not meet
FCC Class A requirements, even if no device or a low-speed USB device is attached to the cable.
Use shielded cable that meets the requirements for full-speed devices.
PIN No. Function PIN No. Function
1 VCC 2 VCC
3 USBP0- 4 USBP0-
5 USBP0+ 6 USBP0+
7 USBG 8 USBG
CN11
1 2
3 4
5 6
7 8
9 10
9 GND 10 GND
OPTIONAL CABLE
- USB Connector Cable
2.7 Parallel Port Connector: CN6
There are four options for parallel port operation:
y Compatible (Standard mode)
y Bi-Directional (PS/2 compatible)
y Bi-Directional EPP. A driver from the peripheral manufacturer is required for
operation.
y Bi-Directional High-speed ECP
PIN No. Function PIN No. Function
1 STROBE 2 ALF
3 PD0 4 ERROR
5 PD1 6 INIT
7 PD2 8 SLCT IN
9 PD3 10 GND
11 PD4 12 GND
13 PD5 14 GND
15 PD6 16 GND
17 PD7 18 GND
19 ACK 20 GND
21 BUSY 22 GND
23 PE 24 GND
CN6
1 2
25 26
25 SLCT 26 N.C