Contec SIS-8601-LVA - External at Power Connector: CN2; External ATX Power Control Connector: CN3; System FAN Connector: CN7

2 Hardware Installations
20
SIS-8601-LVA
2.15 External AT Power Connector: CN2
PIN
No.
Function
1 NC
2 Vcc(+5V)
3 +12V
4 NC
5 GND
1
2
3
4
5
6
6 GND
Housing: AT P8 connector
2.16 External ATX Power Control Connector: CN3
PIN
No.
Function
6 5V SBY
5 PS-ON (Soft ON/OFF Out)
4 GND
3 Power Switch
2 GND
CN3
6
5
4
3
2
1
1 NC
Housing: XHP-6 (JST)
Contact: SXH-001T-P0.6 (JST)
When used with an ATX-compliant power supply that supports remote power on/off,
the CPU card can turn off the system power through software control.
To enable soft-off control in software, “ACPI function” must be enabled in the
CMOS Setup and in the operation system.
2.17 System FAN Connector: CN7
CN7 is a 3-pins box-header for the system cooling fan power connector. The fan must
be a 12V fan. Pin 3 is for Fan speed sensor input. Pin 2 is for +12V power supply .
PIN No. Function Connector type for Cable
1 GND
2 +12V
CN7
1
2
3
3 FAN sense
Housing: 5102-03 (molex)
Contact: 5103 (molex)