Contec SIS-8601-LVA - Clear CMOS Content: JP4; Silicon DISK Memory Add. Selector: JP7

3 Jumper Setting
SIS-8601-LVA
27
3.4 Clear CMOS Content: JP4
The time, date, and CMOS values can be specified in the BIOS Setup. The CMOS values
can be returned to their defaults by using the BIOS Setup. The CMOS memory contains the
password information is powered by the onboard button cell battery. User can erase the CMOS
memory content by short pin2 and pin3 of JP2 together.
JP4 Function
JP4
1 2 3
Normal Operation (Default)
JP4
1 2 3
Clear CMOS Content
*Manufactory Default: Normal Operation
3.5 Silicon DISK Memory Add. Selector: JP7
JP10 is used for memory address selection of DiskOnChip. Below are 4 kinds of DiskOnChip
memory address configuration.
JP7
Function
JP7
1 2
3 4
0DC000 - 0DDFFFh
JP7
1 2
3 4
0D8000h - 0D9FFFh
JP7
1 2
3 4
0D4000h - 0D5FFFh
JP7
1 2
3 4
0D0000h - 0D1FFFh
(Default)
*Manufactory Default: 0D0000h-0D1FFFh