Why does my Contex IQ 2400 Scanner have dust problems?
Dust problems with your Contex Scanner can occur due to insufficient cleaning, bad calibration, or limitations in the CIS technology. To resolve this, clean the scanner and the original you are scanning.
How to fix dust related errors on Contex IQ 2400 Scanner?
To fix dust related errors on your Contex Scanner, clean both the scanner and the original document you are trying to scan.
How to fix stitching problems on Contex IQ 2400 Scanner?
Stitching problems on the Contex Scanner can be resolved by calibrating the scanner.
How to fix calibration related errors on Contex IQ 2400 Scanner?
To fix calibration related errors on the Contex Scanner, erase the parameter block and then calibrate the scanner.
Step-by-step guide for diagnosing and resolving scanner issues.
Lists and explains error codes appearing on the operator panel.
Step-by-step instructions for replacing the power supply.
Procedures for replacing the main controller board.
Steps for replacing the entire CIS unit.
Step-by-step guide for downloading and installing firmware updates.
Detailed steps for activating the scanner online or manually.
To Next Page
General