Conti COMPACT - Caution During Use; Ambient Conditions; During Installation; During the Use

Edition 05/2021 - COMPACT - technical documentation - page 3
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
3. CAUTION DURING THE USE
3.1. AMBIENT CONDITIONS
➢ The ambient temperature around the machine had to be between 5°C et 32°C.
➢ The ambient humidity must not exceed 70 %
➢ The machine must be placed such as the cup warmer is located more than 1.5 meters from the
ground.
3.2. DURING INSTALLATION
➢ The installation (electrical connections, water supply and drainage) must be carried out by a
qualified technician approved by CONTI.
➢ The machine must be connected to a device conforming to the standards of the country where
the machine is installed. Potential costs of equipment compliance are the only responsibility of
the customer.
➢ For any technical intervention, the machines must always have the power disconnected from
the mains.
➢ An effective earth connected to the terminal provided for this purpose on the device is
mandatory
➢ A screw located under the bottom base machine, allow if necessary, to connect several
machine on an equipotential way.
➢ Devices for disconnection from the main supply, having a contact separation of at least 3mm in
all poles, must be provided in the fixed wiring in accordance with the installation rules.
3.3. DURING THE USE
➢ When the machine is not operating, the water cut-off valve has to be closed and the electrical
power supply cut.
➢ When the machine is not supervised it must be disconnected from the power and water supply.
➢ Never disconnect the earthing when the machine is connected to the power supply.
➢ Machines must always be disconnected from the main power, in case of technical
interventions.
➢ We guarantee our machines subject to a correctly sized water treatment is installed backward
and adjusted according to the carbonate hardness of the water network.
3.4. RULES RELATING TO THE ENVIRONMENT
➢ This device has been designed according to the European Directive No. 2002/95/EC. This refers
to the restriction of certain hazardous substances in electrical and electronic equipment
(ROHS)
➢ This device has been designed in compliance with the European Directive No. 2002/96/EC
concerning waste electrical equipment (WEEE).
➢ This picture informs you that this device should not be discarded with household waste.
➢ At end of life, this product must be returned to a collection point or returned to an authorized
dealer. By doing so, you will help to protect the environment and human health.