Need help?Do you have a question about the Conti X-one and is the answer not in the manual?
General| Brand | Conti |
|---|---|
| Model | X-one |
| Category | Coffee Maker |
| Language | English |
Provides detailed measurements and diagrams of the machine, including weight and boiler capacity.
Specifies required temperature and humidity ranges for machine operation.
Outlines essential installation requirements and safety precautions for qualified technicians.
Provides guidelines for safe operation, including water cutoff and power disconnection.
Details environmental compliance and disposal instructions according to European directives.
Instructions for machine standby and potential issues like scale formation.
Lists necessary protective measures and components like water shutoff valve and electrical protection.
Specifies requirements for water pressure and connection types for the machine.
Details requirements for proper drainage system setup, ensuring no fluid return.
Specifies available voltage options (230V Monofase, 400V Trifase) for machine operation.
Explains water hardness measurement and units (°TH or °dH).
Explains carbonate hardness measurement using °Carbonate (°KH).
Describes salt water softeners and resin filters for water treatment.
Initial recommendations before powering on and filling the machine.
Step-by-step guide for the initial filling and heating of the machine.
Explains automatic water level management in the boiler.
Explains the function of steam taps, hot water tap, and filter holders.
Information on filter types (1 cup, 2 cups) and cleaning procedures.
Proper handling, engagement, and cleaning of the filter-holder.
Explains the boiler pressure gauge and factory settings.
Explains the pump pressure gauge and its function during extraction.
Instructions for selecting and using pre-programmed coffee doses via keypad.
Explains the machine's normal operating mode and energy-saving ECO mode.
Details the two available programming menus: BAR and TECHNICAL.
Step-by-step guide for programming coffee doses for single or multiple groups.
Instructions for programming hot water dispensing amounts for X-One and X-One TCI.
Procedure for automatic cleaning of coffee groups using detergent tablets.
Explains the machine's energy-saving standby mode and its benefits.
Overview and entry into the BAR menu for programming settings.
How to set and adjust the machine's internal clock time and day.
How to program automatic power on/off times for the machine.
How to set days when automatic switching is disabled.
Explains the types of counters available and how to access and read them.
Procedure for resetting specific machine usage counters.
Overview of how to access and navigate the technical menu for advanced settings.
Options for setting boiler temperature in Celsius or Fahrenheit units.
Allows you to define the setting temperature in the steam boiler.
Fine-tune PID system parameters for improved temperature stability.
Program mandatory cleaning times for coffee groups to ensure machine upkeep.
Explains compulsory and warning cleaning alarms and their resolution.
Identifies reasons and solutions for filling timeout alarms.
Describes boiler over-temperature alarms and reset conditions.
Lists possible reasons and solutions when the machine fails to power on.
Procedure to reset the coffee usage counters.
Procedure to clear the maintenance reminder message.
Procedure to reset the filter usage counter.
Describes isolation taps located below the drip tray for troubleshooting.
Procedure to reset machine settings to factory defaults.
Information on machine operation in cold conditions (UNDER CONSTRUCTION).
How to adjust coffee temperature by acting on the steam boiler.
How to adjust coffee temperature using the break screw for stability.
Adjusts steam boiler temperature for TCI models based on steam needs.
How to adjust coffee temperature via the mixer on TCI models.
How to adjust coffee temperature using the break on TCI models for stability.
Importance of coffee bean type (Arabica vs. Robusta) and roasting for quality.
Details on grinder capacity and grind adjustment for optimal coffee.
Requirements for machine adjustment, cleanliness, and maintenance for quality.
Operator skills for maintaining coffee quality and machine care.
Importance of daily cleaning for coffee quality and machine operation.
Steps for daily cleaning of various machine parts like outlets and drip tray.
Procedures for semi-annual maintenance tasks, often involving kits.
Procedures for annual maintenance tasks and part replacements.
Procedures for biennial maintenance tasks and part replacements.
Lists and defines codes used in electronic diagrams for components.
Provides a color code key for electrical wires used in the diagrams.
Electrical schematic for a specific machine configuration (2G 230V).
Electrical schematic for a specific machine configuration (3G 230V).
Electrical schematic for a specific machine configuration (3G 400V).
Electrical schematic for a specific machine configuration (2/3G 230V).
Electrical schematic for the steam control version of the machine.
Diagram illustrating the machine's hydraulic system components and connections.
Information about the SOLO KIT for using separate water tanks.
To Next Page
