Edition 05/2014 - X-ONE - page 10
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
7 PROGRAMMING METHODOLOGY
On the 1° group, 4 buttons are used for programming as follows:
+
-
ENTER MENU
All the information are shown on the display
7.1 NORMAL MODE or ECO MODE:
NORMAL MODE (machine ready to operate)
The machine turns on this mode, when the first heating is completed, and the setting temperature is reached.
The display shows :
ECO MODE (machine in stand by)
To be in ECO mode, keep pressing MENU button and press ENTER.
On ECO MODE the display shows:
TO EXIT ECO MODE PRESS ENTER once time
7.2 TWO PROGRAMMING LEVEL:
There are 2 menus: BAR menu (Machine must be in Normal mode:)
TECHNICAL menu (Machine must be in Eco mode:)
x°C HH:mm
Name
x°C HH:mm
ECO
To Next Page
Loading...
