Conti X-one - SUMMARY OF PROCEDURE FOR RESETTING THE COUNTERS; RESETTING THE COFFEE COUNTER; RESETTING THE MAINTENANCE COUNTER; RESETTING THE FILTER COUNTER

Edition 05/2014 - X-ONE - page 26
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
11 SUMMARY OF PROCEDURE FOR RESETTING THE COUNTERS
11.1 RESETTING THE COFFEE COUNTER
 Go on the programming parameters on the BAR level.
 In the Counter step menu
 Press « ENTER »
 When the display shows:
Espresso Gr: 1
XXX
 Press simultaneously the key n° 3 and n°4 from the group n°1 during 3 seconds,
 The display will show:
Espresso Gr: 1
Total Reset
Note : The total coffee counter can’t be reseted.
11.2 RESETTING THE “MAINTENANCE” COUNTER
When the maintenance has been done, the calling message need to be deleted. The procedure is
as follow :
 Switch off the machine with the ON/OFF button (below the machine).
 Keep the key n°1 et n°2 from the left group pressed.
 Swtich on the machine with the ON/OFF button
 The display shows : « Service Reset »
The counter “maintenance” is reseted.
11.3 RESETTING THE « FILTER » COUNTER
When water treatments have been regenerated, or filters have been changed,, the calling message
need to be deleted. The procedure is as follow :
 Switch off the machine with the ON/OFF button (below the machine).
 Keep the key n°3 et n°4 from the left group pressed.
 Swtich on the machine with the ON/OFF button
 The display shows : « Filter Reset »
The counter « filter » is reseted.