Edition 05/2014 - X-ONE - page 17
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
8.2 PROGRAMMING EXPLANATIONS ON BAR LEVEL:
Clock set:
Allows you to time the internal clock.
Press ENTER until clock set is displayed, then press + or – to ajust correct time.
HH: hour (0 … 23)
mm: minutes (0 … 59)
Day: week day
Automatic on/off mode:
Allows to set the automatic switch ON and switch OFF time of the machine.
Press ENTER until automatic on/off mode is displayed, press + or – to set correct time.
On: HH:mm automatic switching on time
Off: HH:mm automatic switching off time
This Switching ON/OFF time is the same for all the days of the week.
To deactivate automatic on/off mode the display must show: On: -- -- . -- --
Day off setting (Closed on)
Allows you to choose 2 days in the week, on which the machine won’t start automatically.
You can choose 1 or 2 days off: the automatic switching mode will not switch the machine.
Select the days with + or – : Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday.
To deactivate day off function the display must show: "------------------"
Counters:
Allows you to read partial coffee doses distributed.
Press ENTER to access to Counter menu
Press MENU to see each key. The display shows:
• Water quantity. (liters).
• Machine cycles number (service purpose).
• Espresso number (1 cup) on group 1, 2 and 3
• 2 espresso number (2 cups) on group 1, 2 and 3
• Coffee number (1 cup) on group 1, 2 and 3
• 2 coffees (2 cups) on group 1, 2 and 3
Note:
• The counter goes up to 65535 for each button. Then it restarts from 0.
• A distribution is recorded each time you push a button
Counters reset:
When the display shows:
Espresso Gr 1
xxx
Press simultaneously buttons n°3 and n°4 on group n°1 for 3 seconds.
The display shows then:
Espresso Gr:1
Reset Totals
Then, all the counter for each button is reseted.
To Next Page
Loading...
