To Next PageTo Next Page
Need help?Do you have a question about the Continental Fireplaces BCDV36NTR and is the answer not in the manual?
General| Brand | Continental Fireplaces |
|---|---|
| Model | BCDV36NTR |
| Category | Indoor Fireplace |
| Language | English |
Steps to follow if gas is detected.
Dimensions for CDV36 model.
Dimensions for BCDV36 model.
General operating and safety instructions.
Appliance rates, efficiencies, and general operational notes.
Details found on the appliance's rating plate.
Specifies vent lengths, components, and installation requirements.
Illustrates standard top and rear vent installations.
Procedures for periscope and corner vent terminations.
Required clearances for air terminal placement.
Guides for selecting correct venting configurations.
Explanation of symbols and terms used in venting calculations.
Values for vent lengths based on elbow degrees.
Guidelines for horizontal venting to the top.
Guidelines for horizontal venting to the rear.
Guidelines for vertical venting to the top or rear.
Steps for preparing the CDV36 for rear exit installation.
Steps for preparing the CDV36 for top exit installation.
Steps for preparing the BCDV36 for rear exit installation.
Steps for preparing the BCDV36 for top vent installation.
Protecting walls and ceilings during installation.
Horizontal installation procedure for CDV36.
Horizontal installation procedure for BCDV36.
Vertical installation procedure through a roof.
Guidelines for using flexible vent pipes.
Horizontal air terminal installation with flexible venting.
Vertical air terminal installation with flexible venting.
Connecting flexible vent pipe to the appliance.
Guidelines for using rigid vent pipes.
Horizontal air terminal installation with rigid venting.
Installation for extended horizontal and corner terminals.
Vertical air terminal installation with rigid venting.
Restricting vertical vents for CDV36 for flame appearance.
Installation guidelines for mobile homes.
Instructions for connecting the gas supply.
Installing an optional remote wall switch or thermostat.
Framing requirements and clearances for CDV36.
Specific framing dimensions for CDV36.
Framing requirements and clearances for BCDV36.
Specific framing dimensions for BCDV36.
General minimum clearances for enclosures.
Minimum enclosure clearances for CDV36.
Minimum enclosure clearances for BCDV36.
Minimum clearances required for mantels.
Instructions for installing nailing tabs on BCDV36.
Procedures for removing and installing the appliance door.
Instructions for installing louvres.
Proper placement of logs for optimal effect and function.
Placement of charcoal embers.
Application of vermiculite for CDV36 model.
Placement of glowing embers for flame effect.
Placement of the manufacturer's logo.
Installation of the optional rock kit.
Safety precautions and steps for lighting the pilot and burner.
Steps to follow if gas is detected.
Procedure for safely turning off the gas supply.
Adjusting the pilot burner flame size and pressure.
Adjusting the air shutter for optimal flame characteristics.
Visual check of pilot and burner flames for abnormalities.
Procedure for replacing the appliance door glass.
Cleaning and care instructions for the appliance glass.
Conditions and limitations of the product warranty.
