To Next PageTo Next Page
Need help?Do you have a question about the Continental Fireplaces BCDV36PTR and is the answer not in the manual?
General| Model | BCDV36PTR |
|---|---|
| Category | Indoor Fireplace |
| Type | Direct Vent |
| Fuel Type | Natural Gas or Propane |
| Efficiency | Up to 70% |
| Venting | Direct Vent |
| Finish | Black |
| Ignition Type | Electronic Ignition |
| Glass Type | Tempered |
| Warranty | Limited Lifetime Warranty |
Instructions on how to respond if gas is detected, including turning off gas and evacuating.
Key safety warnings and requirements for installation, operation, and maintenance of the appliance.
General introductory information and warnings for the gas appliance.
Physical dimensions and specifications for the CDV36 model.
Physical dimensions and specifications for the BCDV36 model.
Overall guidelines and requirements for installing the gas appliance.
Rates, efficiencies, and operational details for both CDV36 and BCDV36 models.
Details found on the appliance's rating plate, including certifications and specifications.
Specifies approved vent components, their lengths, and suppliers.
Illustrates standard top and rear exit vent installation methods with key clearances.
Instructions for periscope and corner termination vent setups.
Required clearances for vent terminals from various building elements and codes.
Guides for selecting appropriate venting configurations based on rise and run.
Explanation of symbols and terms used in venting calculations.
Table of equivalent vent lengths for different elbow degrees.
Guidelines and formulas for horizontal top exit venting configurations.
Guidelines and formulas for horizontal rear exit venting configurations.
Guidelines and formulas for vertical top or rear exit venting configurations.
Steps for preparing the CDV36 model for rear exit venting.
Steps for preparing the CDV36 model for top exit venting.
Steps for preparing the BCDV36 model for rear exit venting.
Steps for preparing the BCDV36 model for top vent installation.
Methods to protect surrounding wall and ceiling materials during installation.
Specific steps for horizontal installation of the CDV36 model.
Specific steps for horizontal installation of the BCDV36 model.
Steps for installing the vent system vertically through a roof.
Instructions for connecting and installing flexible vent pipes.
Instructions for connecting and installing rigid vent pipes.
Specific requirements for installing the appliance in mobile homes.
Procedures and safety precautions for connecting the gas supply.
Instructions for installing an optional remote wall switch or thermostat.
Guidelines for framing the enclosure for the CDV36 model.
Specifies required clearances and dimensions for framing.
Guidelines for framing the enclosure for the BCDV36 model.
Detailed clearance requirements for appliance enclosures.
Clearance requirements for mantels and other combustible materials.
Instructions for installing nailing tabs on the BCDV36 model.
Procedures for removing and reinstalling the appliance door.
Steps for installing the louvres on the appliance.
Correct positioning of logs, embers, and vermiculite for proper function.
Instructions for applying the appliance logo to the glass viewing door.
Steps for installing the optional rock kit accessory.
Step-by-step guide for lighting the pilot and main burner.
Procedure for safely turning off the gas supply to the appliance.
How to adjust the pilot flame size and gas pressure.
How to adjust the air shutter for optimal flame characteristics.
Periodic checks of flames, components, and venting for proper operation.
Procedures for cleaning, replacing, and caring for the appliance glass door.
List of common replacement parts with part numbers and descriptions.
Lists of flexible vent kits, terminal kits, and accessories.
Lists of conversion kits and screen kits for different models.
Diagnosing issues with burner ignition, pilot flame, and gas flow.
Troubleshooting flame appearance, carbon deposits, and exhaust fumes.
Diagnosing issues related to remote switches, wiring, and valves.
Covers materials, workmanship, and component coverage.
Explains terms, exclusions, and requirements for warranty claims.
Record of maintenance, service technician, and special concerns.
