www.rinnai.us
Model V2532W 3
SPECIFICATIONS
Power Supply
Appliance - AC 120 Volts - 60Hz.
Remote control DC 12 Volts (Digital)
Safety devices
Flame failure - Flame rod
Boiling protection - 203°F lockout thermistor
Remaining flame (OHS) - 194°F bi-metal switch
Fusible link - 264°F thermal fuse
Automatic frost protection - Bi metal sensor & anti-frost heaters
Combustion fan rpm check - Integrated circuit system
Over current - Glass fuse (3 amp)
Remote control
MC-45-4US Main control Kitchen / Laundry
BC-45-4US Bathroom control
BSC-45-4US Second bathroom control
Remote control cable Non-polarized two core cable
Clearances from combustibles
Top of heater 12"
Front of heater 24"
Sides of heater 6"
Back of heater 0"
Ground 12"
Clearances from non-combustibles
Top of heater 2"
Front of heater 0" (Do not block or restrict intake or exhaust vents)
Sides of heater 1/2"
Back of heater 0"
Bottom of heater 2"
Installations within RGB-25 Recess Box: Clearances from combustibles to
recess box top, bottom, back and sides = 0"
Clearance from Eaves, Porches, Overhangs Top of heater 36"
Minimum and Maximum gas supply pressure
Natural Gas : Minimum 6" W. C.
(NAT.) Maximum 10.5" W. C.
Propane Gas: Minimum 10" W. C.
(LPG) Maximum 13.5 " W. C.
Manifold Gas Pressure
Natural Gas 3.4" W. C. high fire 0.56" W. C. low fire
LPG: 5.1" W. C. high fire 0.88" W. C. low fire
Warranty
Residential: Ten years heat exchanger / five years parts (see unit's warranty for details)
Commercial or Space Heating: No Warranty -- Use V2532WC Water Heater
NOTE: Rinnai is continually updating and improving products. Therefore, specifications are subject to change
without prior notice.
To Next Page
Loading...
Need help?
General