4. Remove the bottle cap and use a tissue to wipe away any
solution around the bottle tip before dispensing a drop.
5. Squeeze a small drop of solution onto a clean,
nonabsorbent surface.
6. Immediately touch the tip of the test strip to the drop of control
solution.
7. Hold the tip in the drop until the meter beeps.
The meter counts down for 5 seconds before the meter
displays the control test result. The meter automatically marks
the result as a control test. Control test results are not included
in your meter Logbook, in blood glucose averages, or in
targets in the
C
ONTOUR DIABETES app.
8. Compare your control test result with the range printed on the
test strip bottle, foil packet, or bottom of the test strip box.
9. Remove the test strip and dispose as medical waste or as
advised by your health care professional.
If your control test result is out of range, do not use your
C
ONTOUR NEXT ONE meter for blood glucose testing until you
resolve the issue. Contact Customer Service. See Contact
Information.
CAUTION: ÅÄÅÊ·ÆÆÂϹÅÄÊÈÅÂÉÅÂËÊ¿ÅÄÊÅÏÅËÈŰĽ»ÈÊ¿ÆÅÈÊÅ
the test strip directly from the bottle.
50
To Next Page
Loading...
Need help?
General
