Control Microsystems 5901 - At@ Command Set; Mn - Initial Cellular Power Level Setting; En - Compromise Equalizer Enable Command

5901 High Speed Dialup Modem Hardware Manual
October 19, 2007
72
ERROR Otherwise.
10.10 At@ Command Set
10.10.1 @Mn - Initial Cellular Power Level Setting
This command is included for compatibility only and has no effect other than returning a result
code.
Command: @Mn
n Decimal number corresponding to the selected power setting.
0 @M0 command.
.
.
.
30 @M30 command.
Result Codes:
OK 0 to 30.
ERROR Otherwise.
10.11 AT: Command Set
10.11.1 :En - Compromise Equalizer Enable Command
This command is included for compatibility only and has no effect other than returning a result
code.
Command: :En
n Decimal number corresponding to the selected option.
0 :E0 command.
1 :E1 command.
Result Codes:
OK 0 or 1.
ERROR Otherwise.