Need help?Do you have a question about the Control Techniques Unidrive M300 and is the answer not in the manual?
General| Number of Phases | 3 |
|---|---|
| Keypad | Optional |
| Braking Resistor | Optional |
| Enclosure Type | IP20 |
| Overload | 150% for 60 seconds |
| Product Category | AC Variable Frequency Drive |
| Control Method | V/f, Vector Control |
| Communication Protocols | Modbus RTU, CANopen, Ethernet |
| Analog I/O | 2 Analog Inputs, 1 Analog Output |
| Storage Temperature Range | -40°C to 70°C |
| Switching Frequency | Up to 16 kHz |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Dimensions | Varies by model |
| Weight | Varies by model |
Lists electrical and mechanical ratings for different drive models.
Details voltage, phase, and frequency requirements for AC supply.
Explains terminal configurations and wiring for drive control.
Covers Electromagnetic Compatibility aspects and precautions.
Details the Safe Torque Off function for safety applications.
Lists and describes essential drive parameters in Menu 0.
Detailed descriptions of all drive parameters.
Explains various alarm codes and their meanings.
To Next Page
