WebRelay-10 Plus™ Users Manual
Xytronix Research & Design, Inc. Page 28
System log le: syslog.txt
The syslog.txt le records various system events, which can be used for diagnostics and troubleshooting
purposes.
File Format:
MM/DD/YYYY HH:MM:SS, (category to which message applies): (message)
Sample File:
01/02/2010 04:08:13 DEVICE: Power Up.
01/01/2010 00:41:05 DEVICE: Reset factory defaults.
Listed below is a description of messages that a user may see:
Category: Message: Description:
DEVICE
Power Up Device has been properly powered.
Initialize Device is ready.
Reset Factory Defaults Device has been reset to factory defaults.
EMAIL
Failed DNS Lookup Unable to lookup mail server due to an incorrect DNS setting.
Bad Username Email was not sent due to an incorrect user name.
Bad Password Email was not sent due to an incorrect password.
Authentication
Required
A user name and password are required by the mail server.
No Response No response from SMTP server.
CLOCK
RTC Reset Real Time Clock has been reset.
NTP SERVER
Request Attempt Device attempting to connect to NTP Server.
Failed DNS Lookup Unable to lookup NTP server name due to an incorrect DNS setting.
Success Device successfully connected to NTP Server.
REMOTE
SERVER
Failed DNS Lookup Unable to lookup Remote Server due to an incorrect DNS setting.
Connection Attempt
Started
Connection port with Remote Server has ben opened.
Connection Closed Connection port with the Remote Server has been closed.
DHCP
Address Acquired IP address request successful, and IP address assigned.
Lease Renewal IP address assigned to device was renewed.
MAIN_MCU
New Firmware Loaded New rmware has been loaded to the device.
To Next Page
Loading...